Our services

Award winning

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus. Suspendisse lectus tortor, dignissim sit amet.

Performances

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus. Suspendisse lectus tortor, dignissim sit amet.

Top support

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus. Suspendisse lectus tortor, dignissim sit amet.

“H” CLASS Refuse Drag Chains (H102/H104/H110/H112/H116/H120/H480)

“H” CLASS Refuse Drag Chains can be used for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Due to the huge, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable having capacity when managed at moderate speeds.
The front face of every barrel is flat, providing a wide area to push material along the trough and also to keep the chaim from riding outrageous of the material. The rounded inner part of the barrel is carefully shaped to create Auto Chain excellent sprocket contact. Sidebars are reinforced with wearing sneakers which provide both
additional wearing surface and stiffening for the link. A vertical member on each sidebar assures added hyperlink rigidity and defends the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This durable working chain is available in a pitch selection of 5.000 to 8.000 inches. Each link is stated in accordance with manufacturer’s criteria and may be interchanged with links created by various other chain producers. “H”CLASS Refuse Drag Chain is available in riveted construction only. Grease chambers, cored into each link’s barrel, keep grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain procedure. Links should always be operate in the direction of the closed barrel.

“H” CLASS TRANSFER ROOFTOP CHAINS (H78A/H78B/H130/H131/H138)

“H” CLASS TRANSFER ROOFTOP CHAINS (H78A/H78B/H130/H131/H138)
“EVER-POWER” Transfer Chain comes in two types: “H” Class Transfer Chain and Combination Transfer Chain. “H” Class Transfer Chain contains those numbered H78A, H78B, H130,H131, and H138. All “H” Class Transfer Chain is available just in riveted structure. “H” Class Transfer Chain numbered H 78A, H 130,and H 131 is made with peaked roofs. Chain numbered H 138 and H 78B has flat roofs.
Combination Transfer Chain includes those numbered C55A, C55B, and C55D. It Conveyor Chain really is available just in riveted structure with peaked roofs.
Both types of EVER-POWER Transfer Chain, referred to sometimes as “roof top” and “camelback”chain, are made to carry heavily concentrated loads such as for example lumber, boxes, barrels, and crates. They are usually intended for procedure in troughs in several parallel strands.with only the tops of the links protruding.
All “H” Class Transfer Chain is available in Promal (Duramal). The tensile strengths of HZPT Transfer Chain range between 11,700 to 30,000 pounds.
Rivet pins furnished with “H” Class Transfer Chain are T-head pins which engage two head holders, cast on the side bars of each link, to prevent pin rotation and minimize wear and elongation of pitch.
“EVER-POWER” Transfer Chain is available in a pitch range of 1.631 to 4.000 inches.
Every “EVER-POWER” Transfer Chain is manufactured according to manufacturer’s criteria and may be interchanged with chain of other manufacturers, where available.

Fluid couplings

Fluid couplings Features:
  Improve the starting capability of electric motor, protect engine against overloading, damp shock, load fluctuation and torsional vibration, and stability and load distribution in case of multimotor drives.
Applications:
  Belt conveyers, csraper conveyers, and conveyers of all kinds Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
SELECTION:
  Without particular requirements the following technical data sheet and power chart are used to select the proper size of fluid coupling with oil moderate according to the power transmitted and the swiftness of motor,e,i,the insight of the liquid coupling.
  When ordering,please specify the sizes of the shaft ends of lmotor and powered machine(or reducer)including diamenter,tolerance or match of the shafts(if no tolerance or suit is specific,the bores will be machined th H7),fit amount of the shafts,width and depth of the keys (of notice the standard No.enforced).For ordering the liquid couplings with belt pulley,brake puley or othe particular requirements please condition the technical data in detail.
  YOXz fluid couplings is a coincidence machine with moving wheel which is usually in the output point of the coincidence machine and can be connected with elastic axle connecting machine (plum blossom type elastic axle connecting machine or elastic pillar axle-connecting machine or also the axle-connecting machine specified by customers). Usually there are 3 connection types.
YOXz liquid couplings is inner wheel driver which includes tight framework and the smallest axle size.The fittings of YOXz fluid couplings have a broad usage, simple structure and the size of it has basically be unified in the trade.The bond design of YOXz fluid couplings is that the axle size of it is longer but it is unnecessary to go the electromotive machine and decelerating machine. Just demolish the poor pillar and linked spiral bolt can unload the coincidence machine so it is extreme convenient. Customer must offer the size of electromotive machine axle (d1 L1) and decelerating machine axle (d2 L2). The wheel size (Dz Lz C) in the desk is merely for reference, the real size is set by customers.
Interest:the smallest size Dp belt tray can do.the largeat size the dl axle hole can do YOXp type liquid couplings is a connection style of belt tray with hydraulic coincidence machine. The electromotive machine (or decelerating machine) axle directly inserts in the axle hole of the coincidence machine which is suitable in devices transported by belt.Consumer must provide you with the connection size of electromotive machine axle (d1 L1) and the detailed specification and size of belt tray.
YOXm liquid couplings is one that the axle of decelerating machine directly inserts in the axle hole of coincidence machine and the electromotive machine point ML(GB5272-85) links with plum blossom type elastic axle linking machine. It really is reliable connected and has simple framework, the tiniest axle size which really is a common connection enter current little coincidence machine.
  Customer must provide you with the size of electromotive machine axle (d1 L1) and decerating machine axle (d2 L2) as demonstrated in the picture, others if client usually do not supply, we will manufacture according to the sizes in the desk.
Attention:L in the desk is the smallest axle size.If lengthen the L1,the full total length of L will become added.d1,d2are the biggest size that people can do.
YOXf fluid couplings is a sort connected both sides, the axle size which is longer. But it has simple structure and it is more easy and convenient for fixing and amending (unnecessary to go the electromotive machine and decelerating machine but just the elastic pillar and connecting spiral bolt can unload the coincidence machine).
The relevant elastic axle connecting machine, connecting size and external size is actually the same with YOXe type fluid couplings.

Plastic Roller Chain Sprockets

HZPT Chain and Sprockets is a premier provider of plastic-type material power transmission components. We have plastic sprockets obtainable in ANSI sized #25 – #80 and in a UHMW, Nylatron, or Nylon material. Other components such as Repro and Acetal can be used as well, and we are able to generate the plastic-type metric, double pitch, duplex, engineer class, and custom designed sprockets. Some of the main benefits of utilizing a plastic-type material roller chain sprocket are that they operate quieter and create a far better wear existence on the roller chain. These sprockets are also highly anti-corrosive, extremely light-weight, have high impact resistance, and are FDA approved.

Stainless Steel Sprockets

We stock a full type of 304-grade stainless sprockets both as A-Plate style and B-Hub design. We maintain these on the shelf as regular stock bores. Nevertheless, we can supply sprockets with finished bores because of our fast-reaction internal industrial machine store. Typiclly our sprockets are produced out of 304 grade stainless, but 316 as well as a few additional grades are avaible upon reques

Custom STAINLESS Sprockets

We are able to also supply a wide variety of specialty and double strand stainless steel sprockets. Of the examples below the sprocket on the left is a double strand roller chain sprocket and the sprocket on the right is a specialized custom manufactured stainless steel sprocket that is utilized in a conveying app.

#25 STAINLESS Sprockets
#35 Stainless Steel Sprockets
#40 Stainless Steel Sprockets
#50 Stainless Steel Sprockets
#60 Stainless Steel Sprockets
#80 Stainless Sprockets
#100 STAINLESS Sprockets
A-Plate STAINLESS Sprockets

Sprockets for Free Flow Chains

Free Flow Chains possess dimensional restraints therefore require unique sprockets.
Tsubaki provides sprockets for Double Plus Chains, sprockets for Dual In addition Chains with top rollers, and sprockets for RS Chain with outboard rollers.
Product Lineup
Product Types / Features
Sprockets for Dual Plus Chain/Center Roller Chain
Sprockets for Dual Plus Chain/Center Roller Chain. May be used with Double Plus Chain with snap covers.
Details

Sprockets for Dual In addition Chain with Outboard Rollers
Make use of Sprockets for Dual Plus Chain.
Details
Sprockets for RS Chain with Outboard Rollers
Outboard rollers upon RS Chain with outboard rollers may hinder sprocket hubs depending on the number of sprocket teeth. Use this special sprocket instead.
Details
Sprockets for Dual In addition Chain with Top Rollers
R Rollers on Double Plus Chain with Best Rollers could cause interference with standard sprocket teeth. Use this special sprocket rather.
Details
Sprockets for RS Chain with Best Rollers
Use Drive Sprockets.
Details

Dual Pitch Chain Sprockets

Available for Dual Pitch Chain with S or R rollers.
We offer a line-up for RS2040 – RF2160 with S rollers, and RF2040 – RF2100 with R rollers.
Chains that use S rollers build relationships every other tooth. Sprockets will have a longer existence as chains engage with different teeth each time the rollers rotate (when actual number of teeth is odd).
Product Lineup
Product Types / Features

Pilot Bore Series Double Pitch Chain Sprockets 
Three types are available: Metal type using carbon steel for machine structural use, stainless type with excellent corrosion resistance, and plastic-type type that can be used with no additional lubrication.
Details

Suit Bore Easy Finished Bore Type Dual Pitch Chain Sprockets
Could be selected from set finishes of shaft bores/keyways/set screws. Customers can use this sprocket with no troublesome additional finishing required.
Details

Lock Series Double Pitch Chain Sprockets
Could be mounted to shafts without using a crucial. Frictional force on the tapered sleeve locks sprockets to the shaft without keys.
Details

Idler wheels for plastic Top Chains

We provide a line-up of idler wheels for every chain model.
Product Lineup
Idler Wheels for Plastic-type Modular Chain
Product Types / Features
Idler Sprockets for WT1500/WT3000 Series
Idler sprockets with split teeth for WT1500/WT3000 Series Plastic-type material Modular Chain. Available with 24 and 32T
Details
Idler wheels for WT2250/WT2515 chain sprocket chains
Equivalent simply no. of teeth 16, 18T
Details
Idler wheels for BTO8-M chains
Equivalent simply no. of teeth 12, 18T
Details
Idler Tires for Plastic Top Chain
Product Types / Features
Idler wheels for TTP/TPF/TT/TPS/TTUP/TTU chains
Equivalent no. of teeth 21, 23, 25T available
Details
Idler wheels for TTPDH chains
Equivalent simply no. of teeth 25T available
Details
Idler wheels for TPS chains
Equivalent no. of teeth 12T available
Details
Idler wheels for TPUS chains
Equivalent no. of teeth 12T available
Details
Idler wheels for TP-UB36 chains
Equivalent simply no. of teeth 11, 12, 13T available
Details
Idler wheels for TPUN chains
Equivalent no. of teeth 8, 10T available
Details
Idler wheels for TP-50UNS chains
Equivalent simply no. of teeth 10T available
Details
Idler wheels for TP-30UTW chains
Equivalent no. of teeth 15T available
Details

Sprockets for table top chains

Sprockets for top Chains

Product Lineup
Sprockets for Plastic material Modular Chain
Product Types / Features

Sprockets for WT0405-W Chain
Solid sprockets for WT0405-W Series Plastic-type material Modular Chain.
Chain pitch: 4.5mm
Details

Sprockets for WT0705-W Chain
Chain pitch: 7.5mm
Details
Sprockets for WT1500 Series/WT3000 Series/BTN5 Chain
Diverse range of teeth numbers available.
Details
Sprockets for BT6 Chain
Chain pitch: 19.05mm
Details
Sprockets for BT8 Chain
Chain pitch: 25.4mm
Details
Sprockets for BTC8S Chain
Chain pitch: 25.4mm
Details
Sprockets for WT1907-K Chain
Chain pitch: 19.05mm
Details
Sprockets for WT2510/WT2250 Series Chain
Sprockets for WT2510/WT2250 Series Chain (Chain pitch: 25.4mm)
Tsubaki has upgraded split sprockets with 18T for WT2510/WT2250 Series. on October 1 2018.
Details
Sprockets for WT2500 Series Chain
Chain pitch: 25.4mm
Details
Sprockets for WT2700 Series Chain
Body made of reinforced polyamide material ensures superb wear and corrosion level of resistance. (Chain pitch: 27.2mm)
Details

Sprockets for WT3109-W Chain
Sprockets designed for WT3109-W Chain
Details
Sprockets for WT3816-K Chain
Chain pitch: 38.1mm
Details
Sprockets for WT3827-K Chain
Chain pitch: 38.1mm
Details
Sprockets for WT3835-K/Conveyor Chain WT3835-T Chain
Chain pitch: 38.1mm
Details
Sprockets for WT5707-K Chain
Chain pitch: 57.15mm
Details
Sprockets for BTC4-M Chain
Chian pitch: 12.7mm
Details
Sprockets for BTO8-M Chain
Chain pitch: 25.4mm
Details
Sprockets for WT3085-C325 Chain
For curved conveyance. (Chain pitch: 30mm)
Details
Sprockets for Plastic Top Chain
Product Types / Features
Sprockets for TTP/TTPH/TTPT Chain
Details
Sprockets for TTPDH Chain
Details
Sprockets for TTPM Chain
Details
Sprockets for TPF Chain
Details
Sprockets for TP-OTD Chain
Details
Sprockets for TPSS Chain
Details
Sprockets for TPS/TPH/TTUP/TPU/TPUH-BO Chain
Chain pitch: 38.1mm
Details
Sprockets for TTUPM Chain
Details
Sprockets for TPUS Chain
Details
Sprockets for TPUH-BO Chain
Sprockets for TPUH-BO Chain are designed for use in horizontal conveyors.
Details
Sprockets for TPUSR Chain
Details
Sprockets for TP-UB36 Chain
Details
Sprockets for TPUN Chain
Details
Sprockets for TP-50UN-T95 Chain
Details
Sprockets for TPCC420 Chain
Details
Sprockets for TO Chain
Details
Sprockets for TP-36AK Chain
Details
Sprockets for TP-30UTW-LAP Chain
Details
Sprockets for STAINLESS Top Chain
Product Types / Features
Sprockets for TT Chain
Details
Sprockets for TTU Chain
Details
Sprockets for TU Chain
Details

RIVETLESS DROP FORGED CHAINS & TROLLEY

The Rivetless Drop FORGED Chain is respectable as among the strongest chains ever developed, and has found widespread application in many industries. Because materials usually do not tend to pack in its open framework, Rivetless Drop FORGED Chain can be used extensively for flight conveyors. Its design pennits both horizontal and vertical operation over irregular routes, making it especially adaptable for trolley conveyor program. Special top features of this chain consist of optimum strength without extreme weight, and resistance to lengthening even after extensive operation.
The Cast Manganese Steel Rivetless chain supplies the special top features of optimum strength without excessive weight and resistance to lengthening even after considerable operation. Its design permits both horizontal and vertical operation over irregular routes. This chain is utilized in an array of applications, including flight conveyors and trolley conveyors.
Our Cast Manganese Steel Rivetless Chain is a new items with many industrial applications. This chain can be cast by the shell mold Auto Chain procedure to ensure buyers of a sound casting with an extraordinarily soft surface finish and excellent match. The unique side bar style contributes considerably to the life and power of the chain by providing additional surface contact area and offering protection to the pin mind.
Material:Rivetless Drop FORGED chain and Rivetless Cast Manganese Metal chain are link of medium carbon steel and Alloy steel.

MC33 DOUBLE FLEX CHAINS MC 33

MC33 DOUBLE FLEX CHAIN is a detachable-type chain with a durable, dual flex design for both horizontal turning and regular articulation.It retains its pulling power around the curves with center line radii as small as 18 in .. Its wide-web best design provides more than Stainless Steel Chain sufficient carrying surface. Obtainable in HZPT File-Hard Promal(Duramal) , MC-33 Chain is interchangeable with similar 2.500 inch chain of other manufacturers. This chain is called “5550” chain as well.
MC-33 Chain’s versatility provides a wide variety of applications in dairy, bottling, and related industries. It operates in the direction of its links’ open up ends on Brutaloy sprockets.

MINING CONVEYOR CHAINS CRAWLER CHAINS

The Ever-power Company manufactures the MINING CONVEYOR CHAINS & CRAWLER CHAINS available .Production and profitability depend on encounter conveyor hours; ifs period to take advantage of HZPT’s strength.
HZPT MINING CONVEYOR CHAINS & CRAWLER CHAINS have been designed for power and reliability through Auto Chain customer involvement, engineering, material selection and field tests. Through continual improvement our conveyor chains provide longer lifestyle at the lowest cost per ton.
Our crawler chains are made to be completely interchangeable with the OEM versions and give you the lowest price per ton.
Material:
The MINING CONVEYOR CHAINS & CRAWLER CHAINS are medium carbon steel. Pin are moderate carbon alloy steel and so are the hardened for optimum chain life.
If no item in these sample web pages falls into your requirement, we welcome your drawings and /or samples for all of us to quote and make counter-samples.

Gear Motors For Greenhouse

The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with an integrated limit switch system that’s ideal for assembly of a locally available electric motor. The Gearbox can be used in manually-managed or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is rainproof and windproof. The Gearbox includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmission means that the drive shaft is locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the use of an expansion chamber, the Gearbox can be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the Gearbox in optimal condition because of its entire operating lifetime. The Gearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 Gear motors for Greenhouse minutes.

THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit switch system is obtainable and easy to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

BOILER MOVING GRATE CHAINS

“HZPT” cast chain’s practice of long standing provides allowed them to use experience in the development of improveAuto Chain material that may perform at elevated temperatures and condnions of high abrasion. In addnion to the running gear,the related grate castings are also available.
Our Boiler Moving Grate Chains offers maximum power at minimal weight. It is totally suned for Boiler slagging-off applications along with other conveying and elevating at high temperature ranges uses.
MATERIAL:
BOILER MOVING GRATE CHAINS are links cast of malleable iron or Promal (Duramal). It is a temperature treated malleable iron having greater strength and excellent resistance to wear and abrasion. The Promal (Duramal) chains have warmth treated pins ..
If no product in these sample pages falls into your necessity, we welcome your drawings and /or samples for us to quote and make counter-samples.

700 CLASS WATER TREATMENT CHAINS

Our lengthy pitch 700 Class Pintle Chain offers maximum strength at minimum weight. It is totally suned for sewage plant applications along with other conveying and elevating uses. Sidebars possess casted lugs to fit.
T-head pins fit snugly, eliminating pin rotation and preventing the entry of dirt and grit in to the accurately cored pin holes. Closed bearing construction also keeps the chain secure from pitch elongation due to abrasive wear.
Riveted chain construction is recommended for sewage application, but either cottered or riveted construction is usually on request. Stainless cotters could be furnished when specific. All attachments proven in the below desk and n comply with industry standards. Nevertheless, many specials are also available. E mail us for details.
Our 700 Course Pintle Chain is furnished with carbon metal high temperature treated pins. These pins achieve maximum articulation because they’re manufactured to exact diameters which correctly fit the accurately cored holes of the chain links.
Brutaloy sprocket wheels are available. The curved sidebars on 700 Course Pintle Chain certainly are a feature which enhances maximum chain lifestyle when chain can be run on Chain Saver Hunting Tooth Sprockets. A, F, K, and M Style attachments are available. All the design attachments have huge encounter plates wnh bolt holes for protected mounting of wooden Stainless Steel Chain flights.
As drive chain, 700 Class Pintle links are made to travel in the direction of their barrel ends;
as elevator and conveyor chain, they should travel in the direction of their open ends. All our 700 Course Chain was created to manufacturer’s standards and is certainly interchangeable wnh various other manufacturers’ chain.
MATERIAL
700 WATER TREATMENT CHAINS are links cast of malleable iron or Promal (Duramal). It really is a heat treated malleable iron having greater strength and superior resistance to wear and abrasion. Promal (Duramal) chains have warmth treated pins.

CC 600 Chain and Cast Iron Sprocket

Our CC 600 Conveyor chains are produced in malleable iron with metal pins, with pins that are unhardened.

This verified design results within an assembled chain that is highly durable and wear resistant. Designed withing the gas bottling market (Particularly Liquid Petroleum Gas ) our CC600 series remains a product of 1st choice for distributors and end users alike, in which a quality item is needed first time, each time.

Our CC600 Chains and Sprockets – Ex-Share from our factory in Hangzhou, CN.

The CC600 chains are designed for use in multistrand conveyors handling individual loads under conditions of mild corrosion. They are usually supported in CC600 Chain channels and are highly flexible, allowing for fluid movement and versatility when necessary. This versatility enables them to be used in a variety of durable applications but their main application can be in the bottling industry where they are known as on to handle crates and gas bottles.

To meet the task of the application form environment this chain has been developed with the next features:

Stud ends flush with link.
Large rubbing areas top and bottom.
Iron link, softer than the track and self-lubricating
Corrosion resisting properties.

CC 600 Sprockets.

Our sprockets could be cast or fabricated to meet your needs, however unless or else specified:
Bores are machined to H9 Tolerance, BS 4500 Component 1 (ISO R286).
Keyways are metric, either tapered or parallel to ;BS 4235 Part 1, 1972 (predicated on ISO/R773 & R774).
Sprockets are keywayed in pairs on center line of the tooth gap with bosses facing, deep end of tapered keyway on boss side.

Single setscrews are positioned over the main element way. Any second setscrew is put at 90 degrees to the 1st.

As with the table below, we carry the following cast sprockets for CC600 ex stock at our factory in Dudley,

CC600 Cast Iron Sprocket – 8 Tooth
CC600 Cast Iron Sprocket – 10 Tooth
CC600 Cast Iron Sprocket – 12 Tooth
CC600 Cast Iron Sprocket – 14 Tooth

For further advice, or to find out how our selection of chain and sprockets can enhance your application, follow the hyperlink below and contact we.

600 Class Stainless Steel Ley Bushed Chains and Sprockets

600 Class Stainless Steel Ley Bushed Chains and Sprockets(603/604/600/704). Sometimes known as “Cement sleeve chain” or “intermediate carrier chain” is utilized extensively in Cement mills. The pin holes at the closed end of the 600 Course link are provided with soft bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and may be powered out and changed when they become worn.
Stated in HZPT 600 CLASS LEY BUSHED CHAINS, with a tensile strength range from 20,000to 36,000 pounds and is Stainless Steel Chain available in a pitch selection of 3.00 to 6.04 inches with a complete range of Brutaloy or cast steel sprockets.
As a drive chain, 600 Class Pintle is designed to travel in the direction of the barrel end of the links;as an elevating or conveying chain, its path of travel ought to be toward the open ends of the links.
All 600 CLASS LEY BUSHED CHAINS is produced according to manufacturer’s standards and is completely interchangeable.

500 CLASS BUCKET ELEVATOR CHAINS STAINLESS STEEL CHIAN

500 CLASS BUCKET ELEVATOR CHAINS STAINLESS STEEL CHIAN(567/574/578/503/504/500/330) is a heavyweight, moderately priced chain capable of handling average loads at slower or intermediate speeds. It really is proportionately cast for stability, strength and lengthy, efficient support, and is available in Drive Chain cottered construction. The head of every pin is usually notched to fit the sidebar locking lug which will keep the pin from rotating when the chain is used. Closed bearing building makes 500 Course BUCKET ELEVA TOR CHAINS useful in conveying gritty and abrasive components.
Stated in HZPT CHAINS, with a tensile strength range between 12,500 to 40,000 pounds, 500 CLASS BUCKET ELEVATOR CHAINS is thoroughly cored for pitch precision with even bearing areas that reduce “break-in” wear leading to pitch elongation.
500 CLASS BUCKET ELEVATOR CHAINS is available in a pitch range of 2.32 to 6.30 inches with a complete range of Brutaloy or cast steel sprockets.
A large range of attachments can be found to handle a wide variety of applications. Styles K1,K2 ,F2 and G attachments are offered in right and left hand links.
As a drive chain, 500 Course Pintle is designed to travel in direction of the barrel end of the links;as an elevating or conveying chain, its path of travel ought to be toward the open ends of the links.
All 500 CLASS BUCKET ELEVATOR CHAINS is manufactured according to manufacturer’s standards and is totally interchangeable.

400 CLASS PINTLE CHAINS Stainless Steel Chains

The 400 Course Pintle Chains Stainless Steel Chains(442/445/452/455/462/477/477/4103/4124) is a light-weight,moderately priced chain capable of handling average loads at slower or intermediate speeds. It really is proportionately cast for balance, strength and lengthy, efficient support, and comes in riveted or cottered construction. The head of every pin is notched to fit the sidebar locking lug which keeps the pin from rotating when the chain is definitely in use. Closed bearing building makes 400 Class Pintle Chain useful in conveying moderately gritty and abrasive components.
Stated in HZPT Business, with a tensile power range from 7,800 to 32,500pounds, The 400 Class Pintle Chain is definitely thoroughly cored for pitch precision with easy bearing surfaces that decrease “break-in” wear leading to pitch elongation. 400 Class Pintle Chain is available in a pitch selection of 1.375 to 4.060 inches with a complete assortment of Brutaloy or cast steel sprockets.
A large range of attachments are available to manage a wide variety of applications. Styles A ,K and G attachments are offered in right and left hand links.
As a drive chain, 400 Class Pintle is made to travel in the Drive Chain direction of the barrel end of the links; as an elevating or conveying chain, its direction of travel ought to be toward the open ends of the links.
All of the 400 Class Pintle Chain is produced according to manufacturer’s requirements and is totally interchangeable with various other manufacturers’ chain.
MATERIAL
400 class pintle chains are links cast of malleable iron or Promal (Duramal). It is a temperature treated malleable iron having higher strength and superior resistance to put on and abrasion. Promal (Duramal) chains possess warmth treated pins.

Ever-power specialist in making all kinds of mechanical transmission and hydraulic transmitting like: planetary gearboxes, worm reducers, in-line helical equipment speed reducers, parallel shaft helical equipment reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, car gearboxes, pto drive shafts, special reducer & related gear components and additional related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, equipment racks, chains, timing pulleys, udl acceleration variators, v pulleys, hydraulic cylinder, equipment pumps, screw atmosphere compressors, shaft collars low backlash worm reducers and so forth. furthermore, we are able to produce personalized variators, geared motors, electric motors and additional hydraulic products according to clients’ drawings.

The company offers a reliable gurantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite digesting technology and strict control system.

Recently, the company has been developing rapidly by its wealthy experience in production, adcanced managemant system, standardized administration system, strong technical force. We constantly adhere the concept of survial by quality, and decelopment by advancement in technology and technology.

Ever-power Group is ready to use you together and create brilliance with each other!

Power Locks Locking Assembly

Detailed Product Description
Keyless Locking Devices , High-Torque Tranny, Keyless Locking Assembly

Quick Detail:

Keyless Locking Devices, High-Torque Transmission, Locking Assembly

Standard and non-standard available
With high quality and competitive price
Prompt delivery
Packing as per customer’s demand.

Description:

Keyless Locking Products,High-Torque Transmission, Locking Assembly

1 it could automatically centering, and high precision.
2 it can transfer large torque and axial force.
3 it can assume greater bending instant with small shaft diameter.
4 mechanical connection instead of welding, therefore the process is great.
5 it can bear alternating load and effect load.
6 it reduced quantity, and saving materials.

China manufacturer & exporter of power locks (Locking Assembly). We have the capability to custom design and manufacture specific these power lock items, and their connections to meet your needs. Please feel free to contact us with any enquiries.

Applications:

Power Lock, Locking Assembly, Locking devices is a keyless shaft-hubs locking device allowing you to connect hubs and shaft with high torque transmission, are linker used between shafts and pulley, which can replace the solitary important and splines.

Corrosion Resistant Drive Chains / STAINLESS Roller Chain

Roller chain made from stainless steel.
Provides even greater corrosion resistance than RS Roller Chain or RS surface treated chain. Tsubaki provides four standard stainless steel chain types to meet any application.

Applications and Features
Series SS Series AS Series NS Series
Material SUS304
*Clips are SUS301
Pins and rollers : precipitation hardened stainless steel
Plates, bushes : SUS304
Clips use SUS301
SUS316
*Clips are SUS301
Features
Offers better corrosion level of resistance than metal or plated chains underwater or in contact with acids, alkalis, etc.
Usable in both low and high temperature ranges (-20ºC to 400ºC)
Maximum allowable load : 1.5x that of SS Series
Less corrosion level of resistance than SS Series
Usable in both low and high temperature ranges (-20ºC to 400ºC)
Better corrosion resistance than SS Series
nonmagnetic (aside from the clips)
Product Types/Features
SS Series
SS Series
Our basic stainless steel chain using SUS304 equivalent material. Perfect for use in drinking water or in acidic, alkali, or other corrosive conditions.

Details
NS Series
NS Series
Uses Transmission Drive Chain SUS316 stainless for better corrosion resistance than SS Series. Make use of in circumstances requiring greater corrosion resistance than SS Series.

Details
AS Series
AS Series
Pins and rollers use precipitation hardened stainless for 1.5x the utmost allowable load of SS Series. However, AS Series has much less corrosion level of resistance than SS Series.

Details
LSC Series
LSC Series
Stainless chain with a special engineering plastic-type material sleeve inserted between the pins and bushes for long life, lube-free operation.

900 CLASS SUGAR MILL CHAINS 901 902 907 5174

900 SERIES PINTLE CHAINS, sometimes known as “sugar mill” or “intermediate carrier chain” is used extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, can be installed with overlapping beaded carrier slats to create a continuous apron conveyor for intermediate carrier provider.
The pin holes at the closed end of the 900 Class link are provided with smooth bushings which are press-fitted into the links and keyed into place. The bushings are renewable and can be driven out and replaced when they become worn. 900 Class Pintle Chain is designed with dual barrels, one on each part of the open end of the links, to support double sprockets. The objective of this driving method is to get rid of the possibility of material build-up in the sprocket get in touch with area, which often causes the chain to leap the sprocket. Weighty ribs rigidly reinforce these traveling barrels.
Our 900 Class chain links, with tensile strength from 22,500 to 32,500 pounds, can be found with large sliding areas to lessen chain wear and prolong chain life. Broad wearing surfaces and heavy cross sections team up to provide a substantial link which is manufactured according to manufacturer’s standards and can perfectly replace links created by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in one direction; links should always run in the direction of their closed narrow end.
Obtainable in cottered construction only, 900 Class Chain can be assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the driving barrels to prevent pin rotation. Pin rotation during operation would result in wear on the inside of the bushing. Both the mind of the pin and the cottered end of the pin are guarded by cast lugs on the barrel end of the links.
Material
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon metal high temperature treated pins and carbon metal case hardened bushings as regular. Drive Chain However, stainless pins and bushings can be provided when specified.

High performances

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus.

Industry leader

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus.

Delivers on time

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed non risus.