Zinc-plated guiding unit used to conduct the RB50Eplus tube motors in the guide rail. Capable of absorbing the torque and axial forces of the. The RB50Eplus tube motor is fitted into the guiding unit using the shaft pin with the flat sides and sealed with the collar supplied with the tube motor. The guiding unit is available in left-and right-handed versions and includes a mounting bracket and a cable carrier.

Zinc-plated guiding unit used to conduct the RB120Eplus tube motors in the guide rail. Capable of absorbing the torque and axial forces of the. The RB120Eplus tube motor is fitted into the guiding unit using the shaft pin with the flat sides and sealed with the collar supplied with the tube motor. The guiding unit is available in left-and right-handed versions.

Zinc-plated guiding unit for guiding the HW60 manual drive in the guide rail. Capable of absorbing the torque and axial system forces. The guiding unit is fixed to the HW60 manual drive with a bolt.`

Aluminium guide rail for use with guiding units for the RB50Eplus/120Eplus, RB40/50 and RB120 tube motors. Guide rails can be supplied with a zinc-plated mounting bracket. Non-standard lengths of the guide rails can be supplied on request.

Zinc-plated mounting bracket used to fix the guide rail to greenhouse structure, for example. A hexagonal M6x16 bolt (not supplied) should be used to fix the guide rail to the mounting bracket. Mounting brackets can be fitted to both the top and underside of the guide rail.

Zinc-plated curved guide tube (21.3 dia. x 2) for movable assembly (bottom) to the mounting bracket for the RPR100-4 PowerRoller conductor. The guide tube for movable assembly has a sliding mechanism at the bottom and can be used with girders wider than 70 mm. The curvature in the tube allows the patented tilting movement of the RPR100-4 PowerRoller. The bottom of the tube must be fixed to the "movable" mounting bracket, and the top must be fixed to the "fixed" or "movable" mounting bracket. The tube is supplied with a zinc-plated M8x12 fixing bolt. The guide tube is available in various lengths.

Zinc-plated mounting bracket that can be fixed to the movable guide tube for the RPR100-4 PowerRoller. A mounting bracket with a fixed or movable guide tube can be used with girders wider than 80 mm.

Zinc-plated curved guide tube (21.3 dia. x 2) for fixed assembly (bottom) to the mounting bracket for the RPR100-4 PowerRoller conductor. The guide tube for the fixed assembly can be used with girders wider than 100 mm. The curvature in the tube allows the patented tilting movement of the RPR100-4 PowerRoller. The bottom of the tube must be fixed to the "fixed" mounting bracket, and the top must be fixed to the "fixed" or "movable" mounting bracket. The guide tube is available in various lengths.

Zinc-plated mounting bracket for the fixed assembly to the guide tube for the RPR100-4 PowerRoller. The mounting bracket with a fixed assembly guide tube can be used with girders wider than 100 mm.

Zinc-plated angled mounting bracket for movable connection to the top of guide tube "fixed" or "movable" for the RPR100-4 PowerRoller conductor. Using this mounting bracket allows the top of the guide tube limited movement backwards and forwards, parallel to the roller screen. This means that the conductor follows the axial roller movement, which limits the pulling force of the conductor. The mounting bracket can be fixed to girders.

Zinc-plated angled mounting bracket for fixed connection to the top of guide tube "fixed" or "movable" of the RPR100-4 PowerRoller conductor. Using this mounting bracket prevents the guide tube from moving back and forth in the screen direction. This means that the axial force in respect of the winding is absorbed by the conductor and the roller movement is forced to move in one direction. The mounting bracket can be fixed to girders.

Zinc-plated right guide tube (ø21,3x2) for guide the RPR100-4 PowerRoller. The right-hand guide tube is used in roller screen systems where the tilting of the RPR100-4 PowerRoller is not required (e.g. with twin-roller screen system).

The mounting set is used to mount the fixed guide tubes to brackets for guide the RPR100-4 PowerRoller. This is used with the fixed guide tube that is curved underneath and at both ends of the right-hand guide tube. The mounting set consists of a zinc-plated hexagonal M10x65 bolt, washer and wedge sleeve M10.

Guiding roll unit for guiding the winding cord of the weight compensation of the RPR100-4 PowerRoller roller screen drive. The guiding roll unit is mounted on top of the guiding unit. The guiding roll unit contains a galvanized mounting bow, a shaft and a guiding roll.

Cord for weight compensation RPR100-4 PowerRoller roller screen drive. Cord connects PowerRoller with counter weight and runs over the guiding roll unit. Cord length is 4 m.

Counter weight for weight compensation PowerRoller roller screen drive. Counter weight weighs 10.5 kg.

TheEP PolyCarriage (RPC) is a robust guiding unit for aEP PolyDrive RPD motor gearbox in the roller screen side walls of a poly greenhouse. The PolyDrive is mounted on the PolyCarriage so that it moves with the winding tube when the roller screen opens and closes. A galvanized 1" tube (33.7 mm) must be used as a guide tube for the PolyCarriage. The PolyCarriage has minimum installation dimensions to ensure maximum ventilation. The maintenance-free PolyCarriage is made from galvanized sheet metal and is suitable for assembly both indoors and outdoors. The guide rollers have roller bearings so that there is minimum rolling resistance. The PolyCarriage can be used with weight compensation to minimize the influence of the weight of the PolyCarriage with a PolyDrive on the side wall roller screen. The PolyCarriage is suitable for the installation of an optional cable carrier, which is used for guiding the cables of the PolyDrive motor gearbox.