Aluminum-Bronze Screw Gears

Specifications

Precision grade JIS quality N9 (JIS B1702-1: 1998) JIS grade 5 (JIS B1702: 1976)

Reference

section of gear Normal plane

Gear teeth Standard full depth

Normal

pressure angle 20°

Helix angle 45°

Material CAC702
① When mating screw gears manufactured from the same materials they may trigger abrasion and scoring. It is recommended to mate Screw Gears made up of different materials.

② The allowable torques proven in the table will be the calculated values according to the assumed usage conditions.

③ The backlash values shown in the table are the theoretical ideals for the backlash in the standard direction of a pair ofidentical gears in mesh.

④ For offset shaft applications, match a RH with a RH, or LH with a LH, to make a set of screw gears. For parallel shaft applications,

mesh opposing hands (RH and LH) of helical gear sets.

⑤ If the bore diameter is Aluminum-Bronze Screw Gears usually significantly less than φ 4, then the bore tolerance class is H8. If the bore diameter is certainly φ 5 or φ 6, and the hole length (total size) exceeds three times the diameter, then your class can be H8.