The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with an integrated limit switch system that’s ideal for assembly of a locally available electric motor. The Gearbox can be used in manually-managed or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is rainproof and windproof. The Gearbox includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmission means that the drive shaft is locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the use of an expansion chamber, the Gearbox can be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the Gearbox in optimal condition because of its entire operating lifetime. The Gearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 Gear motors for Greenhouse minutes.

THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit switch system is obtainable and easy to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).