“H” CLASS Refuse Drag Chains can be used for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Due to the huge, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable having capacity when managed at moderate speeds.
The front face of every barrel is flat, providing a wide area to push material along the trough and also to keep the chaim from riding outrageous of the material. The rounded inner part of the barrel is carefully shaped to create Auto Chain excellent sprocket contact. Sidebars are reinforced with wearing sneakers which provide both
additional wearing surface and stiffening for the link. A vertical member on each sidebar assures added hyperlink rigidity and defends the pin from harm.
“H”CLASS Refuse Drag Chain comes in EVRT-POWER Promal or Duramal with a tensile strength range of 36,400 to 52,000 pounds. This durable working chain is available in a pitch selection of 5.000 to 8.000 inches. Each link is stated in accordance with manufacturer’s criteria and may be interchanged with links created by various other chain producers. “H”CLASS Refuse Drag Chain is available in riveted construction only. Grease chambers, cored into each link’s barrel, keep grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain procedure. Links should always be operate in the direction of the closed barrel.