1.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. Before connection, confirm the grease on the surfaces of pins, and in case the level of grease is compact, apply grease with bare hands. (If gloves are employed, the grease might be absorbed through the gloves.)
Illustration: When the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots with the pins. In case the O-rings come loose because of vibration all through transport, refit the O-rings in to your roots in the pins.
In this instance, you should definitely return the grease collected in the roots from the pins to your central surfaces of the pins, far more at portion A than at portions B proven in the above illustration. (Portions A is worn as a result of sliding with the bushings.)
2.The chain can be most simply linked within the teeth of the sprocket. Engage the links at the two ends from the chain with the sprocket teeth and fit connecting pins. If the sprocket could be moved, the chain can also be connected about the loosened side.
three. Connecting procedure
1.Confirm that O-rings are connected to the roots of your pins.
2.In case the amount of grease applied about the connecting pins is smaller, coat the pins with grease on the central portions.
3.Insert the connecting pins into the bushings of the inner links at both ends.
four.Confirm that the grease is applied to your total face of the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and while pressing the connecting plate, set up the spring clip. Verify whether or not the head (the end without a split) from the spring clip is turned in the feeding path on the chain. (See the following illustration.)
6.You should definitely verify that the spring clip is securely fitted while in the clip grooves of your connecting pins.
This completes jointing in the connecting website link. Note that grease within the surfaces of connecting pins and O-rings is usually removed in the course of installation work. In this case, re-grease making use of the grease around the surface with the base chain or the grease while in the polyethylene bag through which the connecting website link was contained.